Caravan Brake linings (electric brakes)
Submitted: Wednesday, Oct 29, 2008 at 14:52
ThreadID:
63016
Views:
6204
Replies:
8
FollowUps:
2
This Thread has been Archived
Cruiser 2091
When caravan brakes need new linings must we buy complete shoes or is there an exchange / rebonding service available?
Should the parts be sourced through a caravan parts outlet or an automotive brake repairer?
I don't know
where to start looking.
Thanks for any help
Reply By: Member - Ian W (NSW) - Wednesday, Oct 29, 2008 at 16:02
Wednesday, Oct 29, 2008 at 16:02
Cruiser,
Don't know where your located so suggest you
check yellow pages or Google for "Brake Bonding Services".
You can have your own shoes re bonded and save money by dealing with the actual factory/bonder.
Very few so called "Brake specialists" would have any idea as to how to re bond, let alone have the equipment to do so. They just order in shelf stock for the faster moving items.
If not able to find a bonder take them into a brake specialist who can send them out for bonding. Very few brake shops would hold exchange Kelsey Hayes Shoes for electric brakes.
It would be
well worth while to
check that whoever you deal with have the facility to radius grind brake shoes and ask them to grind your new shoes/linings to match the radius of the brake drums The benefits being that oversize linings can be bonded if the drums are worn, it also dramatically cuts down the amount of "bedding in" required and subsequent readjusting. You will need to take both the brake drums along to the
shop.
Ian
AnswerID:
332512
Reply By: Dunaruna - Wednesday, Oct 29, 2008 at 17:31
Wednesday, Oct 29, 2008 at 17:31
There are a few things to look out for when buying trailer brake shoes.
Both alko and dexter import shoes from the U.S, they are carp, the linings crack when hot - very very common problem.
In the bonding industry, 2 types of linings are used - segments and roll. Stay away from roll, way too soft for caravans. Segments are much better. Speaking of better, Better Brakes have a change over service (rebonded segments).
AnswerID:
332517
Reply By: toyocrusa - Wednesday, Oct 29, 2008 at 22:22
Wednesday, Oct 29, 2008 at 22:22
Hi Cruiser. Also make sure you have the drums checked for diameter to ensure they are not oversize and then have them machined first. This way you can purchase the shoes to suit. As mentioned a brake specialist similar to Better Brakes would be the better people to deal with as they can machine the drums as
well. Then don't forget to clean,
check and repack the wheel bearings and fit new hub seals. Regards, Bob.
AnswerID:
332558
Follow Up By: Member - Cruiser (NSW) - Thursday, Oct 30, 2008 at 12:45
Thursday, Oct 30, 2008 at 12:45
toyocrusa,
I know your reply above was aimed at Cruiser 2091, but could you please use the full name of the poster in your replies instead of shortening it to Cruiser (in this case) as this will help differentiate between the poster and myself who has been Cruiser on EO since 2002.
Cheers,
Cruiser
FollowupID:
600458
Reply By: Member - Bucky, the "Mexican"- Thursday, Oct 30, 2008 at 04:22
Thursday, Oct 30, 2008 at 04:22
Cruiser
There are lots of
places that do exchange shoes.
I just went into the local Autobarn, with the part, and all the info from the brake drums themselves, and 4 days later the exchange ones were in.
Now that's for my camper, so I presume that a caravan is the same.
You could try this link, if you actually need new ones
Superstore
Cheers
Bucky
AnswerID:
332578