Denco water to air intercooler

Hi Seanny,
Not quite what you're looking for, but I have one on my 105 series 1HZ. The fan and pump in mine are mounted in front of the radiator to one side. It's fairly small in comparison to the air to air kind so restriction to airflow over the radiator is much less. I installed mine to reduce exhaust gas temperature, which it appears to have done reasonably well. The only thing I found is that I had to screw the boost right up to overcome the extra resistance in the intercooler - Denco actually provide a high boost actuator for this reason. Can't really say it's given me a whole lot more power, not noticeably anyway.
Cheers
Gerry

They are a little small for a 4.2 litre donk, thats why you have to screw up the incoming to get what you started with outgoing....they are rated at 350 cfm which is about 200 short of what a hdft sucks in....a 6 inch cooler flows enough thou...but to fit that you need a 2 inch body lift
Andrew