Titan Drawers trouble shooting

Submitted: Sunday, Mar 17, 2019 at 19:34

ThreadID: 137970 Views:9160 Replies:2 FollowUps:0

This Thread has been Archived

Chris D21

I’m wandering if any member have the titan Ute drawers. I have just installed a 2nd hand set. All was going well until I fixer the drawer stoppers to the side of the drawers.

The stoppers prevent the drawers pulling all the way out.

Since I fitted the stoppers the drawers won’t latch closed. They are in the same position as the previous owner had them.

I’m wondering if anyone has had a similar issue.
There doesn’t appear to be anything at the end of the drawers catching on the stopper.

Thanks

Chris

Back Expand Un-Read 0 Moderator Share

Reply By: noggins - Sunday, Mar 17, 2019 at 20:12

Sunday, Mar 17, 2019 at 20:12

Had the same trouble when I fitted mine new.
I ended up cutting a bit off the rubbers so the draw slamed shut , but funnily enough the other side drawer fitted perfectly

Ron

AnswerID: 624466

Reply By: wooly0005 - Tuesday, Mar 19, 2019 at 01:18

Tuesday, Mar 19, 2019 at 01:18

I had the same thing when fitting mine new.

Try taking the stoppers off and turn them around end to end.

There is not much in it but just enough to make a difference.

It worked for me.

Cheers