2005 100 series Landcruiser Sahara
Submitted: Wednesday, Apr 12, 2017 at 20:20
ThreadID:
134647
Views:
5844
Replies:
2
FollowUps:
3
This Thread has been Archived
mick p6
2005 IFS with adjustable
suspension height from factory , is this prevent you from putting a lift kit and or altering the
suspension at all ?
Reply By: Member BarryG - Thursday, Apr 13, 2017 at 11:52
Thursday, Apr 13, 2017 at 11:52
Mine is the same model.
On our trip around Australia last year, after numerous problems (with the back end sagging under load), I decided to upgrade the
suspension. First stop was ARB in
Darwin, who put in heavy duty rear coils and PolyAir bags. This restored the ride height (and then some!), but the actual road ride was terrible! It seems that in the standard AHC system, half the load is taken by the coils and half by the shock absorbers. By adding the new firmer coils, the shock absorbers decided that they didn't need to do anything and the result was a vehicle that bounced around dangerously on corrugated corners - almost undriveable.
On returning
home, I researched and found that AutoCraft in Geelong do several of these fixes each week. There removed all of the AHC system, and fitted Bilstein Platinum torsion bars and shocks to the front, and Bilstein Platinum shocks to the rear (retaining my new ARB coils and airbags).
The result is a different vehicle. Ride is firm but controllable, even under load. Even better, it is now as upgradeable or repairable as a standard
suspension setup.
Cost me about $4700, but worth it!
Barry
AnswerID:
610178
Follow Up By: mick p6 - Thursday, Apr 13, 2017 at 15:54
Thursday, Apr 13, 2017 at 15:54
Thanks Barry that's great to hear you have found a solution as when I
test drove
mine around the side streets in 60 km and 80 km roads, the ride was harsh very hard on bumps ride quality was terrible. There was of coarse no load in the back and this car didn't have storage shelving or additional weight say of a fridge but man did you bounce around a bit. I will look into you suggested
suspension mods and start pricing something to change over with.
regards
mick
FollowupID:
880108
Reply By: Malcom M - Friday, Apr 14, 2017 at 08:16
Friday, Apr 14, 2017 at 08:16
+1 for Autocraft. Brilliant people.
Checkout Lcool.org for heaps of info on replacing the
suspension.
AnswerID:
610203
Follow Up By: mick p6 - Friday, Apr 14, 2017 at 12:29
Friday, Apr 14, 2017 at 12:29
thanks malcom
FollowupID:
880125
Follow Up By: Alloy c/t - Sunday, Apr 16, 2017 at 10:43
Sunday, Apr 16, 2017 at 10:43
Banned from the FJ Cruiser
forum ….
FollowupID:
880158