EOTopo Map Free Downloads

Submitted: Monday, Dec 16, 2013 at 16:02
ThreadID: 105510 Views:7539 Replies:7 FollowUps:30
This Thread has been Archived
Hi all,

Tis the season to be jolly and to celebrate I have just published some free downloads of the EOTopo map series. A new 2.5M scale map is freely available for all to download and comes in OZF4, ECW, TIF and MMF file formats.

The OZF, ECW & TIF are zipped and contain the associated MAP files for use directly within OziExplorer or other mapping program.

The TIF willl will also open on most computers directly without any mapping programs and will allow you to print and view the file.

The MMF file is a MudMap file and is the first of the MudMap supported files.

Also on the download list is the newest 1M scale map. These are available to all existing EOTopo 200K owners and come in OZF4 and ECW formats. So if you also ready have purchased EOTopo 200K you will be able to download this new additional map.

Again many thanks to all the people that have purchased this newest map product. I would also like to thank the numerous people that have contributed updates to the product. We have already added about 2000 more roads updates into the next release and expected thousands more early next year.
David (DM) & Michelle (MM)
---------------------------------
Currently Mapping in the Field Across Australia Fulltime in 2023 - 2025

Lifetime Member
My Profile  My Blog  My Position  Send Message
Moderator

Back Expand Un-Read 2 Moderator

Reply By: ExplorOz - David & Michelle - Monday, Dec 16, 2013 at 17:02

Monday, Dec 16, 2013 at 17:02
Oh yeah - where is the Download button I hear you say - well visit the EOTopo article page and it is at the top of the page.
David
David (DM) & Michelle (MM)
---------------------------------
Currently Mapping in the Field Across Australia Fulltime in 2023 - 2025

Lifetime Member
My Profile  My Blog  My Position  Send Message
Moderator

AnswerID: 523173

Follow Up By: Life Member - Mike (SA) - Monday, Dec 16, 2013 at 19:27

Monday, Dec 16, 2013 at 19:27
Found the download button, and it works!! A great pair of maps. I particularly like the 1M scale; ideal planning resource. VMT David.
Too little time in the bush!
VKS 737 Mobile 0230

Lifetime Member
My Profile  My Blog  Send Message

0
FollowupID: 804500

Follow Up By: AlbyNSW - Monday, Dec 16, 2013 at 19:38

Monday, Dec 16, 2013 at 19:38
I tried to download it on an iPad but it comes up with a message of Safari cannot download this file?
0
FollowupID: 804502

Follow Up By: ExplorOz - David & Michelle - Tuesday, Dec 17, 2013 at 12:14

Tuesday, Dec 17, 2013 at 12:14
The iPad/IOS platforms will not support file download in this fashion - if you want to use the files you will need to transfer them via iTunes to a compatible program on the device such as Mud Map or Memory-Map.

David
David (DM) & Michelle (MM)
---------------------------------
Currently Mapping in the Field Across Australia Fulltime in 2023 - 2025

Lifetime Member
My Profile  My Blog  My Position  Send Message
Moderator

0
FollowupID: 804518

Follow Up By: ExplorOz - David & Michelle - Tuesday, Dec 17, 2013 at 12:15

Tuesday, Dec 17, 2013 at 12:15
Mike,

Did your 1M map in the upper left hand panel say 2014.1 or 2014.2 - if it is .1 then try the download again and get the 2014.2 version installed last night - there was an error in the 2014.1 version.

David

PS: Can you let me know once downloaded if it works OK?
David (DM) & Michelle (MM)
---------------------------------
Currently Mapping in the Field Across Australia Fulltime in 2023 - 2025

Lifetime Member
My Profile  My Blog  My Position  Send Message
Moderator

0
FollowupID: 804519

Reply By: ExplorOz - David & Michelle - Tuesday, Dec 17, 2013 at 13:44

Tuesday, Dec 17, 2013 at 13:44
Well I made a mess of that lot. I published the 1M and 2.5M at version 2014.1 but there was a serious error with the data so it was just republished at 2014.2 so if you have already downloaded them check in the top left hand panel to see if you have 2014.1 or 2014.2 - you should have 2014.2 as this is the latest version of the 1M & 2.5M maps.

David
David (DM) & Michelle (MM)
---------------------------------
Currently Mapping in the Field Across Australia Fulltime in 2023 - 2025

Lifetime Member
My Profile  My Blog  My Position  Send Message
Moderator

AnswerID: 523211

Reply By: Someone - Tuesday, Dec 17, 2013 at 14:07

Tuesday, Dec 17, 2013 at 14:07
Bought the maps. Cannot find any download button. Registered to find the free download
AnswerID: 523213

Follow Up By: Someone - Tuesday, Dec 17, 2013 at 14:14

Tuesday, Dec 17, 2013 at 14:14
Download buttons came up when refreshed the page
Downloaded the EOTopo 2.5M Australia 2014.2 no issues and when tried to download the EOTopo 1M Australia 2014.2 says 'You must have purchased EOTopo 200k to qualify'. I have purchased. Hopefully pick it up tomorrow at LPO when we fly to town for mail weather permitting at this stage.
0
FollowupID: 804524

Follow Up By: ExplorOz - David & Michelle - Tuesday, Dec 17, 2013 at 15:09

Tuesday, Dec 17, 2013 at 15:09
The downloads will be enabled once the product has been dispatched from the warehouse - the system checks the status of the orders to determine to validity of the license.

So if you just ordered it will be available in about 4 hours when the dispatch emails are sent for the day.

David
David (DM) & Michelle (MM)
---------------------------------
Currently Mapping in the Field Across Australia Fulltime in 2023 - 2025

Lifetime Member
My Profile  My Blog  My Position  Send Message
Moderator

0
FollowupID: 804526

Follow Up By: Someone - Tuesday, Dec 17, 2013 at 19:46

Tuesday, Dec 17, 2013 at 19:46
Ordered 2 weeks ago. Had to use my Pigpond address so didn't have to wait two days. Normally use GMail only. Ordered under my GMail address.
0
FollowupID: 804543

Follow Up By: Someones - Tuesday, Dec 17, 2013 at 21:02

Tuesday, Dec 17, 2013 at 21:02
Changed my e-mail address and still would let me download. Couldn't post because of two days limit. Wouldn't let me back to post amd wouldn't send e-mail despite pressing the Re-send button and telling me the e-mail had been sent. Had to re-register with altered name and same e-mail address and of course still cannot download.
0
FollowupID: 804549

Follow Up By: Someones - Wednesday, Dec 18, 2013 at 17:32

Wednesday, Dec 18, 2013 at 17:32
Still cannot get the download of the 1:2.5M.
Please advise how I get the download.
Tried everything.
0
FollowupID: 804599

Follow Up By: The Explorer - Wednesday, Dec 18, 2013 at 17:37

Wednesday, Dec 18, 2013 at 17:37
Hello

What is your exact problem in detail...can you open this page?

Eotopo Info Page

Can you see free download link button at top?

What happens when you click on it? A list should appear with the various download options.

Cheers
Greg
I sent one final shout after him to stick to the track, to which he replied “All right,” That was the last ever seen of Gibson - E Giles 23 April 1874

Lifetime Member
My Profile  My Blog  Send Message
Moderator

0
FollowupID: 804601

Follow Up By: Someones - Wednesday, Dec 18, 2013 at 17:41

Wednesday, Dec 18, 2013 at 17:41
Actually got the 2.5M one, but cannot get the 1M one. Tells me I need to buy the maps which I have twice - last edition and new edition.
0
FollowupID: 804603

Follow Up By: The Explorer - Wednesday, Dec 18, 2013 at 17:59

Wednesday, Dec 18, 2013 at 17:59
Only issue (I assume) would therefore be that its not recognising your login name/email as the same as purchase information.

I shall now butt out.

Cheers
Greg
I sent one final shout after him to stick to the track, to which he replied “All right,” That was the last ever seen of Gibson - E Giles 23 April 1874

Lifetime Member
My Profile  My Blog  Send Message
Moderator

0
FollowupID: 804609

Reply By: Someone - Tuesday, Dec 17, 2013 at 14:35

Tuesday, Dec 17, 2013 at 14:35
"We have already added about 2000 more roads updates" how do you supply updates?
I have *HEAPS*.
AnswerID: 523215

Follow Up By: ExplorOz - David & Michelle - Tuesday, Dec 17, 2013 at 15:10

Tuesday, Dec 17, 2013 at 15:10
Awesome - we love updates. I have have a look at the Updates tab on the EOTopo page you will see an email addresss which is updates at eotopo.com - send them in here and they will be attended to.

David
David (DM) & Michelle (MM)
---------------------------------
Currently Mapping in the Field Across Australia Fulltime in 2023 - 2025

Lifetime Member
My Profile  My Blog  My Position  Send Message
Moderator

0
FollowupID: 804527

Follow Up By: Someones - Wednesday, Dec 18, 2013 at 17:40

Wednesday, Dec 18, 2013 at 17:40
David can you lay out how you would like the map updates. How do you want it shown for example where bitumen starts and ends.
0
FollowupID: 804602

Reply By: Someone - Tuesday, Dec 17, 2013 at 14:42

Tuesday, Dec 17, 2013 at 14:42
ARGH
The 2.5m scale shows no current and abandoned railway lines.
There are some cardinal rules of topographic maps that should always be adheared to. Not showing the current and abandoned railway lines is like trying to rewrite history and the basic rules of cartography.
Leaving out such vital topographic information is cardinal sin.
AnswerID: 523216

Follow Up By: ExplorOz - David & Michelle - Tuesday, Dec 17, 2013 at 15:16

Tuesday, Dec 17, 2013 at 15:16
Yes that was an oversight and you will find the 200K - 2014 has the same oversight. I have corrected this now and you will be able to get this sorted in the next 200K update which is expected to be released in Feb/March next year. There will be more online and 1M & 2.5M updates prior to the next 200K release so keep your eyes on these and if you see anything else simply let us know and it will be taken care of for the next release.

If you have a look at the EOTopo Online system you will see that these are now showing plus I corrected a label issue.

The map set is a work in progress and we are adding heaps of updates and changes all the time - we are working on a multiple update model so that the data is evolving all the time and is able to be provided as up to date as possible.

David

David (DM) & Michelle (MM)
---------------------------------
Currently Mapping in the Field Across Australia Fulltime in 2023 - 2025

Lifetime Member
My Profile  My Blog  My Position  Send Message
Moderator

0
FollowupID: 804528

Follow Up By: ExplorOz - David & Michelle - Tuesday, Dec 17, 2013 at 15:19

Tuesday, Dec 17, 2013 at 15:19
The 2.5 does have the current Operation status railways shown - it is however just a grey line at this scale - I will tweak this a little for the next release to make it bigger.

David
David (DM) & Michelle (MM)
---------------------------------
Currently Mapping in the Field Across Australia Fulltime in 2023 - 2025

Lifetime Member
My Profile  My Blog  My Position  Send Message
Moderator

0
FollowupID: 804529

Follow Up By: The Explorer - Tuesday, Dec 17, 2013 at 15:34

Tuesday, Dec 17, 2013 at 15:34
Someone (and Anybodyelse)..Keep in mind 1:2.5m is a very small scale map - some detail is just impossible to show (or at least there is no point in showing). I think abandoned railway lines may fall into this category.

I am also not sure the map rates as a topographical map either - it has some shaded relief but I don't think it serves much purpose in this respect - more a map that provides a wide view from which you can determine areas of interest for closer, more detailed inspection/planning (i.e. then look at a larger scale map of specific areas). Different scale maps have different uses. You can't apply the same "cardinal rules" (real or made up) to maps of all scales (except maybe north arrow and scale bar - though maybe not that important on a digital map :)

Cheers
Greg
I sent one final shout after him to stick to the track, to which he replied “All right,” That was the last ever seen of Gibson - E Giles 23 April 1874

Lifetime Member
My Profile  My Blog  Send Message
Moderator

0
FollowupID: 804531

Follow Up By: Someone - Tuesday, Dec 17, 2013 at 19:50

Tuesday, Dec 17, 2013 at 19:50
Greg the Geoscience 1:5m shows all the railways. Railways are a *MAJOR* topographical feauture current and abandoned and should never be left out. Maps need to be cartgraphically accurate with major features regardless of scale. Leaving our railways is a cardinal sin of cartography - no excuses.
0
FollowupID: 804544

Follow Up By: The Explorer - Tuesday, Dec 17, 2013 at 20:34

Tuesday, Dec 17, 2013 at 20:34
Hi

No worries - wasn't aware of the cardinal rules (self taught map maker). More information the better (without cluttering a map to the point it is unreadable) but still don't see the point of showing abandoned railways on such a small scale (1:2.5m ->1:5 mill!!) - fair enough of current "Major" features.

Also how long does a railway line have to be "abandoned" before you can leave them off and not have the map police come down on you ? :) I notice several abandoned railways south of Perth are not shown on the GA 1:1mill scale map..must be too old.

Cheers
Greg
I sent one final shout after him to stick to the track, to which he replied “All right,” That was the last ever seen of Gibson - E Giles 23 April 1874

Lifetime Member
My Profile  My Blog  Send Message
Moderator

0
FollowupID: 804547

Follow Up By: Someones - Wednesday, Dec 18, 2013 at 17:36

Wednesday, Dec 18, 2013 at 17:36
Greb abandoned railways or tramways are *NEVER LEFT* off topographic maps as they are major topographical features and important historically and often well used by hikers, riders and vehicles.
For example there is a small bit of abandoned railway line east of Guyra circa 1915. Was up there the other day and the bridge bearers and where the line was laid is still very much there.
0
FollowupID: 804600

Follow Up By: The Explorer - Wednesday, Dec 18, 2013 at 17:55

Wednesday, Dec 18, 2013 at 17:55
Oh well looks like they do leave some off for one reason or another - the one I was referring to goes from Busselton to August in WA - shut down and ripped up in ~1950. It's not shown (as an abandoned rail line) on 25K (one small section is), 50K, 100K, 250K etc etc topos I have. A universal ignorance of one of the cardinal rules by the looks. Can see why it should be on the 25K -> 250K - they are turning most sections into a walk trail so it should reappear one day:)

Cheers
Greg
I sent one final shout after him to stick to the track, to which he replied “All right,” That was the last ever seen of Gibson - E Giles 23 April 1874

Lifetime Member
My Profile  My Blog  Send Message
Moderator

0
FollowupID: 804608

Follow Up By: phil - Friday, Jan 10, 2014 at 14:45

Friday, Jan 10, 2014 at 14:45
The 2.5m scale map also misses out at least one major road. Thunderbolts Way from Walcha to Gloucester in NSW. Not even a suggestion that there is a road there. In fact it is a major link from the New England to Newcastle.
There are also numerous red spider lines which seem to have no meaning all over the place. They do not correspond to any roads that I know.
0
FollowupID: 805800

Follow Up By: The Explorer - Friday, Jan 10, 2014 at 15:02

Friday, Jan 10, 2014 at 15:02
...Probably several major roads missing - its a work in progress.

The "numerous red spider lines" are shown in the map legend as representing minor roads/unsealed tracks. I haven't checked all of them :) but ones in my area do correspond to existing roads (keep in mind many are not shown - just the major minor roads/tracks - if that makes sense). Maybe you could provide a more specific example where you are sure the tracks shown don't actually exist.

...Though not sure it matters - you wouldn't use a map of this scale to navigate minor tracks/roads anyway. I think the depiction of these on this scale map is simply to indicate there are tracks in that particular area - best get a larger scale map if going to a specific area.

Cheers
Greg
I sent one final shout after him to stick to the track, to which he replied “All right,” That was the last ever seen of Gibson - E Giles 23 April 1874

Lifetime Member
My Profile  My Blog  Send Message
Moderator

0
FollowupID: 805803

Follow Up By: ExplorOz - David & Michelle - Friday, Jan 10, 2014 at 15:59

Friday, Jan 10, 2014 at 15:59
Phil,
Not all roads are rendered on the 2.5M map but I will have a look in that area when I next fire up the GIS workstation - can you provide me a screen capture of the area of interest/where the road should be. This will make it easier for us to identify the correct area. Simply email this to updates@eotopo.com and I will be sure to get this action-ed/investigated.

David
David (DM) & Michelle (MM)
---------------------------------
Currently Mapping in the Field Across Australia Fulltime in 2023 - 2025

Lifetime Member
My Profile  My Blog  My Position  Send Message
Moderator

0
FollowupID: 805806

Reply By: Member - Michael W14 - Tuesday, Dec 17, 2013 at 21:04

Tuesday, Dec 17, 2013 at 21:04
I have purchased the 200K and am very happy with it.

If I have this larger scale map, what use would the 1m or 2.5m be to me ?

What use would I put them to ?

Thanks,

Willie
AnswerID: 523228

Follow Up By: The Explorer - Tuesday, Dec 17, 2013 at 21:16

Tuesday, Dec 17, 2013 at 21:16
Hello Willie

You can never have enough maps ...and they are free so nothing to lose. Though I get your point. The full 200k (or 250K) mosaic is possibly all you need - given we are talking digital maps so you can zoom in and out changing "scale".

Good thing about smaller scale digital (raster) maps I suppose is that you can see the labels of major towns etc even when zoomed way out. So, when on the PC (etc) you can whiz around and have a look knowing where you are without having to zoom in, maybe mark a few waypoints, then load your larger scale 200K map and then see more detail. I do that all the time going from 250K -> 50K/25K .

Cheers
Greg
I sent one final shout after him to stick to the track, to which he replied “All right,” That was the last ever seen of Gibson - E Giles 23 April 1874

Lifetime Member
My Profile  My Blog  Send Message
Moderator

1
FollowupID: 804551

Follow Up By: Gramps - Wednesday, Dec 18, 2013 at 14:15

Wednesday, Dec 18, 2013 at 14:15
Willie,

So that's where you're hiding "brother". What software are you using the maps with these days ?

Regards
0
FollowupID: 804583

Follow Up By: Member - Michael W14 - Wednesday, Dec 18, 2013 at 14:49

Wednesday, Dec 18, 2013 at 14:49
Gramps you old dog. How are you ?

I am doing well and planning a big trip to WA with my now "mostly" retired wife.

I use Ozi for Android on my phone and tablet, Ozi CE on my in-car screen and full Ozi on the laptop that I take away, and on my desktop.

They all have different ways of doing things, so this means I am constantly bamboozled !

I am mad keen on gold detecting these days and go to WA or Qld goldfields every year.

Willie.
0
FollowupID: 804586

Follow Up By: Someones - Wednesday, Dec 18, 2013 at 17:43

Wednesday, Dec 18, 2013 at 17:43
Use Android OziExplorer on my phone and 7" tablet in vehicle and Windows version on laptop and have WinCE Ozi on off road motor cycle and four wheeler and aircraft.
0
FollowupID: 804604

Reply By: PeteS - Wednesday, Dec 18, 2013 at 07:07

Wednesday, Dec 18, 2013 at 07:07
Good work David,

I purchased my set via Memory Map.

A couple of questions if I may:
1) How do we get the newest 1M scale maps as I have tried this site and it won't let me.

2) Was the Memory Map release 2014.1 or 2014.2?

Thanks,
PeteS
AnswerID: 523235

Follow Up By: ExplorOz - David & Michelle - Wednesday, Dec 18, 2013 at 10:23

Wednesday, Dec 18, 2013 at 10:23
Pete,

The 1M will be provided in Memory-Map as soon as it is added to the set. I do not control this part of the process and I think the guys are on holidays. It is a hard time of the year to be updating all this stuff. However it will be done ASAP. I may also once I get a converted file publish a link to download this part.

The currently released maps are 2014 - the .1 & .2 are incremental updates and have only just been done in the last few days.

David
David (DM) & Michelle (MM)
---------------------------------
Currently Mapping in the Field Across Australia Fulltime in 2023 - 2025

Lifetime Member
My Profile  My Blog  My Position  Send Message
Moderator

1
FollowupID: 804565

Follow Up By: Member - Kevin S (QLD) - Friday, Jan 10, 2014 at 19:56

Friday, Jan 10, 2014 at 19:56
I am in a similar position. It seems that MM support for Australia and NZ is a one man band and he is currently on his yacht somewhere.
I only took the 2 device license as I don't want to be bothered transferring files from my computer so I have been wondering how all this will work. There seems to be an assumption in mist of the instructions that downloads will be to a PC. Or am I reading it wrong?
Kevin
Kevin
It is important to always maintain a sense of proportion

2019 Mitsubishi Cross

Lifetime Member
My Profile  My Blog  My Position  Send Message

0
FollowupID: 805816

Sponsored Links